CRU DX115 DC Installation Guide download pdf

Rugged, Reliable, Mobile, Secure

1-800-260-9800 www.CRU-DataPort.com

NOTE: For SAS operation, a SAS controller and SAS hard drive are

required.

SAS DX115 DC receiving frame supports SAS and SATA drives. SATA

6Gb/s DX115 DC receiving frame supports SATA drives only.

Package Contents

(1) DX115 DC Receiving Frame and/or Drive Carrier

(4) M3 drive mounting screws for 2.5” drives

(4) #6-32 drive mounting screws for 3.5” drives

(4) M3 chassis mounting screws

(1) Power Adapter- Legacy 4pin to 15pin SATA

Carrier Handle

This handle allows the ejection and installation of the drive carrier.

To eject the carrier, simply push on carrier handle. Once handle pivots

outward, pull handle to remove carrier.

To install the carrier, simply insert the drive carrier into the receiving

frame. Push handle in to fully seat carrier into the receiving frame.

Power Button

The DX115 DC ships with the power button disabled. To enable the but-

ton remove the Power Button Disable jumper (see Figure 2 for details).

CAUTION: It is the responsibility of the user to ensure that the host

does not access the drive while attempting to remove the drive.

Failure to do so may result in loss of data and/or damage to the

drive itself!

* If the Power Button is enabled use the Power Button will function as

follows:

OFF - Press and hold down the power button until the Drive Ready LED

starts to ﬂash. Drive is ready to be removed when the Drive Ready

LED is OFF.

ON* - Press and hold down the power button until the Drive Ready LED

starts to ﬂash. Drive is ready to be accessed when the Drive Ready

LED is ON.

Operation

Drive Ready/Error LED

This bi-color LED indicates either the status of the drive or fan/DC

power, depending on the color.

Drive Ready (blue): Flashing blue LED indicates that drive is

inserted and powering up. Steady blue LED glow indicates drive is

powered on and ready for access.

Error (red): Flashing red and blue LED indicates a fan failure.

Steady red LED glow indicates DC power failure.

Drive Activity LED

This amber LED indicates when the host computer is accessing the data

on the drive. LED will ﬂash during communication with the host computer.

Most SAS drives provide support for the Drive Activity LED feature (refer

to your SAS drive manufacturer’s documentation for further information).

If your drive does not support this feature, the Drive Activity LED can

be enabled via host connection (cable not included) to Pin 1 located on

Receiving Frame Motherboard (Figure 2). Refer to your SAS PC system/

host controller manufacturer’s documentation for further information.

Data Express DX115 DC SAS/SATA Install Guide

Removable SAS/SATA Drive Enclosure

Figure 1: Front Bezel

Carrier

Handle

Power

Button

Drive Ready/

Error LED

Drive

Activity

LED

Fan Error LED

Disable Button

Push Here to Eject Carrier

1 2

Summary of Contents

Page 1 - Operation

Rugged, Reliable, Mobile, SecureTM1-800-260-9800 www.CRU-DataPort.comNOTE: For SAS operation, a SAS controller and SAS hard drive are required.SAS DX1

Page 2 - Certiﬁcation

Rugged, Reliable, Mobile, SecureTM1-800-260-9800 www.CRU-DataPort.comFan Error LED Disable Button This button allows the user to disable the Fan Error

Comments to this Manuals

No comments

CRU DX115 DC Installation Guide

Browse online or download Installation Guide for HDD/SSD enclosures CRU DX115 DC. CRU DX115 DC User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for HDD/SSD enclosures CRU DX115 DC