Cru ToughTech Duo 3SR User Manual

Browse online or download User Manual for Computer Accessories Cru ToughTech Duo 3SR. CRU ToughTech Duo 3SR User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 2
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
ToughTech
TM
Duo Quick Start Guide
1. Installation Steps
1.1 Installing Hard Drives
ToughTech Duo is compatible with 2.5-inch SATA hard drives that are no more than 9.5
millimeters in height.
a. Push the ejection button, the handle will swing open.
b. Remove the drive sled and swing the side arm out.
c. Insert the drive with the label up, then close the side arm.
Make sure the arm is flush with the drive.
d. Secure the drive with the provided screws (optional).
e. Slide the drive sled back into the unit.
f. Close the handle and ensure that the sled is securely in place.
1.2 Connecting and Powering ToughTech Duo
Both models of ToughTech Duo can connect to your computer in multiple ways. Cables for all
data connection types are included for your convenience. Choose one of these connection
types to use and plug the corresponding cable into ToughTech Duo.
ToughTech Duo-QR can be bus powered through its FireWire connection. If not using bus
power, plug in the power adapter to the unit and to a grounded electrical outlet. Switch the
ToughTech Duo on.
2. Setting up a RAID
ToughTech Duo offers two options for RAID configuration, RAID1 and RAID 0, as well as
Single-Disk Mode. Stop all data transfers before setting or changing RAID types or rebuilding a
ToughTech is a trademark of CRU Acquisitions Group, LLC. Other marks are the property of their respective owners.
© 2010 CRU Acquisitions Group, LLC. All rights reserved.
Product Warranty
CRU warrants this product to be free of significant defects in material and workmanship for a period of two years from the original date of purchase. CRU’s warranty is
nontransferable and is limited to the original purchaser.
Limitation of Liability
The warranties set forth in this agreement replace all other warranties. CRU expressly disclaims all other warranties, including but not limited to, the implied war-
ranties of merchantability and fitness for a particular purpose and non-infringement of third-party rights with respect to the documentation and hardware. No CRU
dealer, agent, or employee is authorized to make any modification, extension, or addition to this warranty. In no event will CRU or its suppliers be liable for any costs
of procurement of substitute products or services, lost profits, loss of information or data, computer malfunction, or any other special, indirect, consequential, or
incidental damages arising in any way out of the sale of, use of, or inability to use any CRU product or service, even if CRU has been advised of the possibility of such
damages. In no case shall CRU’s liability exceed the actual money paid for the products at issue. CRU reserves the right to make modifications and additions to this
product without notice or taking on additional liability.
FCC Compliance Statement: “This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.”
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is operated in a home or commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communica-
tions. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at this
own expense.
In the event that you experience Radio Frequency Interference, you should take the following steps to resolve the problem:
1. Ensure that the case of your attached drive is grounded.
2. Use a data cable with RFI reducing ferrites on each end.
3. Use a power supply with an RFI reducing ferrite approximately 5 inches from the DC plug.
4. Reorient or relocate the receiving antenna.
A9-000-0003-1 Rev. 1.1
Product name/code ToughTech Duo-QR, ToughTech Duo-3SR
Interface Types & Speeds eSATA - up to 3.0 Gbps
Dual FireWire 800 (400 compatible) - up to 800 Mbps (-QR models only)
USB 2.0 - Up to 480 Mbps
USB 3.0: up to 5.0 Gbps (-3SR models only)
RAID Levels Supported RAID 0 (striped) or RAID 1 (mirrored)
Drive Compatibility All 2.5” SATA hard drives that are no more than 9.5mm high
Power Switch 2 position: on/off
Operating System
Requirements
Windows 7, Vista, or XP
Mac OS X
Linux distributions using kernel version 2.4 or above
Compliance FCC, CE, RoHS
Product Weight 1.65 pounds with drives, 1.05 pounds without drives (excluding accessories)
Product Dimensions 159mm L x 89mm W x 35 mm D
Warranty 2-year limited warranty. See warranty statement for details and limitations. We don’t
want anything to go wrong with your CRU product. But if it does, tech support is
standing by and ready to help. Contact us at www.cru-dataport.com/technical-support/
customer-technical-support.php
For the full User Manual and more information about this product, please visit
www.cru-dataport.com or www.wiebetech.com/techsupport.php.
Models Covered:
ToughTech Duo-QR
ToughTech Duo-3SR
Page view 0
1 2

Summary of Contents

Page 1 - Duo Quick Start Guide

ToughTechTM Duo Quick Start Guide1. Installation Steps1.1 Installing Hard Drives ToughTech Duo is compatible with 2.5-inch SATA hard drives that

Page 2 - RAID is not a Backup

4. Adding a New Disk4.1 RAID 1In the event of a disk failure or removal for a RAID 1, the RAID will continue to function in a degraded state. Add a

Comments to this Manuals

No comments