Cru DataPort 25 USB 3.0 Carrier User Manual download pdf

Protecting Your

Digital Assets

™

Protecting Your

Digital Assets

™

CRU DataPort

25 USB 3.0 Carrier

Thank you for purchasing CRU’s DataPort 25 USB 3.0 Carrier. The DataPort

25 USB 3.0 Carrier is designed to provide users with the ultimate in data

access exibility. It can be used as a portable stand-alone external hard drive,

and when inserted into the DataPort 25 frame it will operate at the full SATA

6Gbps transfer rate. The power supply is not required if your system provides

standard USB bus power, freeing you from the tether of a power cord and

providing access to your data anywhere.

Features

• Access data anywhere via USB 3.0

• Supports 6Gbps transfer speeds when connected into a DataPort 25

receiving frame

• Removable carrier for one 2.5-inch SATA Revision 3.0 compatible

hard drive

• Backwards compatible with previous SATA Revision hard drives

• Backwards compatible with USB 2.0

• Heavy-duty stainless steel construction

Product Warranty

CRU-DataPort (CRU) warrants this product to be free of signicant defects in material and workmanship for a period of two years from the original

date of purchase. CRU’s warranty is nontransferable and is limited to the original purchaser.

Limitation of Liability

The warranties set forth in this agreement replace all other warranties. CRU expressly disclaims all other warranties, including but not limited

to, the implied warranties of merchantability and tness for a particular purpose and non-infringement of third-party rights with respect to the

documentation and hardware. No CRU dealer, agent, or employee is authorized to make any modication, extension, or addition to this warranty.

In no event will CRU or its suppliers be liable for any costs of procurement of substitute products or services, lost prots, loss of information or data,

computer malfunction, or any other special, indirect, consequential, or incidental damages arising in any way out of the sale of, use of, or inability

to use any CRU product or service, even if CRU has been advised of the possibility of such damages. In no case shall CRU’s liability exceed the

actual money paid for the products at issue. CRU reserves the right to make modications and additions to this product without notice or taking on

additional liability.

FCC Compliance Statement: “This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause

undesired operation.”

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may

cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in

which case the user will be required to correct the interference at this own expense.

In the event that you experience Radio Frequency Interference, you should take the following steps to resolve the problem:

1) Ensure that the case of your attached drive is grounded.

2) Use a data cable with RFI reducing ferrites on each end.

3) Use a power supply with an RFI reducing ferrite approximately 5 inches from the DC plug.

4) Reorient or relocate the receiving antenna.

FOR OFFICE OR COMMERCIAL USE

Product Models DataPort 25 USB 3.0 Carrier

Host Interfaces • USB 3: up to 5 Gbps

• USB 2: up to 480 Mbps

• SATA: up to 6 Gbps

Drive Types Supported 2.5-inch SATA hard drives

Data Connectors • One (1) USB 3.0 connector (backward compatible)

• One (1) DataPort 25 Floppy Bay Frame connector

Operating System

Requirements

• Windows 8, 7, Vista, or XP

• Windows Server 2012, 2008, and 2003 product families

• Mac OS X

• Linux distributions that support the connection type used

Connector Insertion Rating 25,000+ Carrier-to-Frame

Torque 2.5-inch hard drives, M3 screws: 4 inch-pounds max.

Compliance EMI Standard: FCC Part 15 Class B, CE

EMC Standard: EN55022, EN55024

Shipping Weight 2.00 pounds (includes accessories)

Dimensions Complete Assembly: 4.02” x 6.10” x 1.02” (102mm x 155mm x 26mm)

Removable Carrier: 3.11” x 5.24” x 1.02” (79mm x 133mm x 26mm)

Technical Support Contact us at www.cru-inc.com/support. We also offer phone support at

(800) 260-9800 or (360) 816-1800.

A5-025-0018-1 Rev. 2.0

1 2

Summary of Contents

Page 1 - 25 USB 3.0 Carrier

Protecting Your Digital Assets™Protecting Your Digital Assets™CRU DataPort®25 USB 3.0 CarrierThank you for purchasing CRU’s DataPort 25 USB 3.0 Carrie

Page 2 - 1 Installation Steps

PMS 711 2 cyan85 magenta76 yellow10.25.12CRU Mark1 Installation Steps1.1 Floppy Bay Frame Installationa. Slide the receiving frame into an open 3.5”

Comments to this Manuals

No comments

Cru DataPort 25 USB 3.0 Carrier User Manual

Browse online or download User Manual for Computer Accessories Cru DataPort 25 USB 3.0 Carrier. CRU DataPort 25 USB 3.0 Carrier User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Computer Accessories Cru DataPort 25 USB 3.0 Carrier